PT. Taharica ( Distributor, Agent, Service)

The SFS and SFH model are metal disk type couplings. Carbon steel is used for the body material. Very high torsional rigidity assures accurate shaft rotation and ultra precision....

Unlike spiral bevel gears, hypoid gears are characterized by a pinion axis that is offset from the center of the gear axis.
Tooth engagement is characterized by the addition of....

Zerol bevel gears offer performance that is equivalent to that of straight bevel gears and are spiral bevel gears with a spiral angle of 0Â ° . They offer the advantage of low....

When rotating the rotating shaft, the dial rotates in the same direction. A clockwise or counterclockwise type is selected for a dial. A dial without a scale is also available for....

Compared to straight bevel gears, the improved contact ratio of spiral bevel gears allows them to rotate more smoothly offering superior noise and vibration quality.
Custom....

This is a model with satisfactory design and function adding a handle part to the stand-alone model SD-53/ 75. A large variety of handle outside diameters from 66mm to 250mm are....

A stand-alone model is classified into 38, 53 and 75 according to the outside diameter.
The size 38 is an integrated model with handle that is used by mounting directly on a....

Features ;

Usually paired with spur or similar gears, internal gears feature teeth that are located on the inside of the gear.
The ability to distribute load with two or more....

When rolling up a film, fabric or thread, the diameter differs between beginning and end of take-up, and the tension added to the material constantly varies.
If stretch material....

Features:

Helical gears offer an improved contact ratio due to a helical tooth trace, enabling them to rotate more smoothly and quietly than spur gears. They also offer....

Torque is transmitted by engagement of teeth and large torque can be transmitted even though the clutch is small. There are " full position" with entire circumference engagement....

Features ;

Spur gears are the most frequently used type of cylindrical gear.
Thanks to the absence of thrust, spur gears feature simple overall design, assembly, and low....

Introduction of control systems is gaining for automated machinery in various fields. Especially, position control systems are used for all kinds of automated machinery. We offer....

OPL Permanent-Magnet Mag-Particle Slip Clutch
( Torque Range: 0.27~ 3.5in-lbs / 0.03~ 0.4Nm) .
Low cost slip clutch design for momentary and/ or continuous slipping. Torque is....

These dedicated power supplies are developed to maximize the performance of Miki Pulley electromagnetic clutches and brakes.
A variety of 12 models are available. The appropriate....

MWC Electromagnetic Multiple-Disk Clutch.
( Torque Range: 18~ 8851ft-lbs / 25~ 12000Nm)
Multiple disk clutches designed for high torque small environment. Clutches are designed....

Several clutches and brakes could be used when designing a complex mechanism. Various units are available to eliminate a troublesome task to combine the required number of each....

MDB-N Electromagnetic Multiple-Disk Brake.
( Torque Range: 13~ 826ft-lbs / 18~ 1120Nm)
Multiple disk brakes designed for high torque small space environment. Multiple disks....

d Brakes
Compatible with overall general industrial machinery and the rational design offers good performance.
The 101 and CS model ( clutch) and the 111 model ( brake) with the....

MDC Electromagnetic Multiple-Disk Clutch.
( Torque Range: 13~ 6196ft-lbs / 18~ 8400Nm)
Multiple disk clutches designed for high torque small space environment. Multiple disks....

Ideal for use in small precision equipments such as business machine, communications equipment or automobile machinery that has a susceptibility to fluctuations of torque and....

HC Electromagnetic Hysteresis Clutch.
( Torque Range: 0.4~ 8.9in-lbs / 0.05~ 1Nm)
Hysteresis clutch for industrial application. Torque is independent of slip speed and can be....

HB Electromagnetic Hysteresis Brake.
( Torque Range: 0.4~ 8.9in-lbs / 0.05~ 1Nm) .
Hysteresis brake for industrial application. Torque is independent of slip speed and can be....

PET Permanent-Magnet Eddy-Current Clutch/ Brake
( Torque Range: 0.18~ 8.9in-lbs / 0.02~ 1Nm) .
Eddy current clutch, torque is proportional to rpm. Since torque is transmitted....

PHT Permanent-Magnet Hysteresis Clutch/ Brake
( Torque Range: 0~ 62in-lbs / 0~ 7Nm) .
Permanent magnet hysteresis units can be configured as a clutch or a brake depending upon....

FNB Electromagnetic Spring Applied Brake.
( Torque Range: 9 ~ 71 in-lbs/ 1~ 8 N-m)
A small spring applied brake with a very thin profile which is mainly used for robotic and....

PMB Electromagnetic/ Permanent-Magnet Brake * North America only* .
( Torque Range: 3.5~ 265in-lbs / 0.4~ 30Nm)
Permanent magnet brake designed for industrial and mobile....

Ogura Clutch DAN BRAKE;

RNB Spring-Brake elektromagnetik Terapan
( Torque Range: 1.5 ~ 148ft-lbs / 2 ~ 200Nm)
Spring rem memegang diterapkan dirancang untuk aplikasi....

RNB-Z Electromagnetic Zero-Backlash Spring-Applied Brake.
( Torque Range: 1.5~ 12ft-lbs / 2~ 16Nm) .
Spring applied holding brake designed for general industrial applications.....

MZS Electromagnetic Single-Position Tooth Clutch.
( Torque Range: 18~ 184ft-lbs / 25~ 250Nm)
Clutch is designed for high torque small space environments where no slip and only....

Electro-magnetic clutch and brake are equipment for connecting, disconnecting, braking and holding of machinery by electromagnetic power generated by coil energization. They are....

MP Electromagnetic Clutch/ Brake.
( Torque Range: 4~ 443in-lbs / 0.5~ 50Nm)
Clutch/ brake units are designed for extremely fast response, a high cycles applications. Because of....

VSAU Electromagnetic Clutch/ Brake.
( Torque Range: 9~ 37ft-lbs / 12~ 50Nm)
Clutch/ brake combination unit designed for general design applications. Both with input and output....

There are 3 types of belts used for belt-type stepless speed changers, wide-width speed change belt, double cog belt and standard V belt.
Select the appropriate belt for the....

AMU-C Electromagnetic Clutch/ Brake.
( Torque Range: 2~ 70in-lbs / 0.25~ 8Nm)
Clutch/ brake units are designed for general industrial use. Unit features die cast housing with....

The AX series are a combination of motor and reducer based on a solid shaft worm reducer as its center module. There are the geared motor AXM model, the AXM-BS model with brake....

TMC Electromagnetic Clutch
( Torque Range: 4~ 147ft-lbs / 6~ 200Nm) .
Clutch designed for general industrial use. Compact design with a thin overall profile. Zero backlash....

The RW series are a combination of motor and speed changer based on a hollow-shaft worm reducer as its center module.
There are the geared motor RWM model, the RWM-BS model with....

MMC Electromagnetic Clutch
( Torque Range: 37~ 1475ft-lbs / 50~ 2000Nm) .
Heavy duty clutches best suited for marine and mobile applications. Bi-directional spring resists....

A speed change pulley that is used for our company name constitutes the core of MIKI PULLEY speed changer and reducer product lines.
By changing the pitch diameter of the belt of....

TMB Electromagnetic Brake
( Torque Range: 4~ 147ft-lbs / 6~ 200Nm) .
Brake is designed for general industrial use. Low inertia zero backlash armature can be bolted to your hub.....

Commercial AC 100V or 200V power supply can be used regardless of 50/ 60Hz, and the optional speed can be selected by the speed setter on the control panel. The speed can be....

VB Electromagnetic Brake
( Torque Range: 5~ 44ft-lbs / 7~ 60Nm) .
Brake designed for general industrial applications. Units come standard with zero backlash armature. Units are....

Commercial AC 100V or 200V power supply can be used regardless of 50/ 60Hz, and the optional speed can be selected by the speed setter on the control panel. The speed can be....

It is the " Static Leonard method" non-stage speed change motor that combines a separately-excited motor appropriate to variable speed with the SCR control device controllable by....

AMB Electromagnetic Brake
( Torque Range: 2~ 70in-lbs / 0.25~ 8Nm) .
Brake designed for general industrial application units feature zero backlash, armature hub, and field....

AMC Electromagnetic Clutch
( Torque Range: 2~ 70in-lbs / 0.25~ 8Nm) .
Clutch designed for general industrial use. Clutches are designed with zero backlash armatures and a double....

B Electromagnetic Brake
( Torque Range: 8~ 150ft-lbs / 11~ 203Nm) ,
Brake designed for general industrial use. Brakes are dimensionally interchangeable with popular competitors....