TDS Monitor[10 Jun. 2010, 11:28:19]
Keterangan
Create TDS-230 Consistence Monitor
Performance features
This instrument is a panel instrument for on-line monitoring of industrial process consistence monitor. Range switch over and constant check can both be freely set and adjusted through the operation component on the rear panel; unique signal collecting and processing technology and special thick film circuit are adopted to make measurement accurate and operation stable; there are also other features such as linearized data, automatic temperature compensation, not subject to the length change of cable and maintenance-free. It’ s an ideal auxiliary instrument of various types of small pure water equipment.
Main technical specifications
Measurement range: 0~ 20 0~ 200 0~ 2000ppm
Accuracy: 1.5% ( FS)
Stability: ± 2 × 10-3 ( FS) / 24h
Auxiliary electrode: Plastic structure; constant: 1.0cm-1
Temperature compensation component: NTC
Medium temperature: 5~ 50
Thread dimension: 1/ 23pipe thread
Medium pressure: 0~ 0.5Mpa
Cable composition: RVP + coaxial 75-2 double shielding
Cable length: 5m or on other agreement ( 5~ 30m)
Temperature compensation: Automatic compensation with 25 as the reference temperature
Display: Back light 3.5-bit LCD
Output signal: Non-isolated 4-20mA signal output
Maximum load impedance: 300© Max@ 24V DC, instrument mode
Power supply: AC 220V± 10% 50Hz
Power consumption: d1W
Environment conditions Temperature: 5~ 50
Humidity: d85% RH
Dimensions: 48 × 96 × 100mm ( height × width × depth)
Slot dimensions for installation: 45 × 91mm ( height × width)
Installation: Jam-in
Prioritas Indotrade Tahun ke-14
www.profilterindonesia.com
