RO membranes Osmonics Desal[1 Apr. 2010, 21:57:35]
Keterangan
Desal AG8040F-400
The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig ( 1, 379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry. AG8040F-400 High Rejection Brackish Water elements feature a FRP outerwrap and 27 mil feed spacers. This element is designed with flush end connections.
GE Desal AG8040F-400 RO Element TFC:
* The GE Desal AG8040F-400 Dry, Flush Cut reverse osmosis elements are used for brackish water desalination.
* The A-Series thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.
* GE Osmonics Desal AG8040F-400 High Rejection Brackish Water reverse osmosis elements feature a FRP outerwrap and 27 mil feed spacers and is designed with flush end connections.
* GE Desal AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig are desired.
* These elements allow moderate energy savings, and are considered a standard in the industry.
Element Specifications
Model : AG8040F-400
Flow : 10500 GPD ( 39.7 m3/ d)
Active Area : 400 ft2 ( 37.2 m3)
Avg. Rejection : 99.5%
Min. Rejection : 99%
Part Number : 1206784
Specifications are based on a 2000 mg/ L NaCl solution at 225 psig operating pressure ( 1551 kPa) , 77° F ( 25° C) , 15% recovery, pH7.5 after 24 hours. Individual flux may vary + 25% / -15% .
Operating and Design Parameters
Membrane: Thin Film Membrane ( TFM® )
Typical Operating 200 psig ( 1, 379 kPa)
Pressure:
Maximum Pressure: 450 psig ( 3, 103 kPa)
Maximum Temperature: 122° F ( 50° C)
Chlorine Tolerance: 1, 000 ppm-hrs, dechlorination recommended
Optimum Rejection pH: 7.0 -7.5
Operating pH Range: 4.0 - 11.0
Cleaning pH Range: 2.0 - 11.5
Desal AK4040TF Indonesia
The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AK Low Pressure Brackish Water Elements are selected when high rejection and low operating pressures are desired. These elements allow significant energy savings since good rejection is achieved at operating pressures as low as 100 psig ( 689 kPa) . AK4040TF Low Pressure Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. This element is designed with male end connections.
* GE Desal AK4040TF Low Pressure RO Element TFC:
* The GE Desal AK4040TF Dry - Filmtec Style reverse osmosis elements are used for brackish water desalination.
* The Desal AK4040TF RO element is tape wrapped.
* The A-Series thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.
* GE Osmonics Desal AK4040TF High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections.
* GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired.
* These elements allow significant energy savings.
Element Specifications
Model : AK4040TF
Flow : 2, 200 GPD ( 8.3 m3/ d)
Active Area : 89 ft2 ( 8.3 m3)
Avg. Rejection : 99.5%
Min. Rejection : 99%
Part Number : 1206816
Specifications are based on a 2000 mg/ L NaCl solution at 225 psig operating pressure ( 1551 kPa) , 77° F ( 25° C) , 15% recovery, pH7.5 after 24 hours. Individual flux may vary + 25% / -15% .
Operating and Design Parameters
Membrane: Thin Film Membrane ( TFM® )
Typical Operating 200 psig ( 1, 379 kPa)
Pressure:
Maximum Pressure: 450 psig ( 3, 103 kPa)
Maximum Temperature: 122° F ( 50° C)
Chlorine Tolerance: 1, 000 ppm-hrs, dechlorination recommended
Optimum Rejection pH: 7.0 -7.5
Operating pH Range: 4.0 - 11.0
Cleaning pH Range: 2.0 - 11.5
Prioritas Indotrade Tahun ke-14
www.profilterindonesia.com
