- Harga
- Bersaing
- Jumlah Pesanan
- Tambah ke Keranjang
- Cara Pembayaran
- Tunai
- Jumlah
- Banyak
- Kemas & Pengiriman
- Unit
Neotronics Impact Pro-Personal Multi-Gas Monitors
Reliable Operation
Pre-calibrated plug-in sensor cartridge
High specification sensors
Patented Surecellý toxic sensors
Stable and accurate
Easy to Use
One button on/ off
Multi-lingual, intuitive menu system
On screen prompts guide user
Built-in correction factors for flammable gases
Minimal training required
General Specification
Use : Portable multigas monitor for the protection of personnel from up to four hazardous gases in the working environment
Available to detect# : Flammable, Oxygen, Carbon Monoxide, Hydrogen Sulfide, Sulfur Dioxide, Chlorine, Nitrogen Dioxide, Ammonia, Carbon Dioxide.
User interface : Ultra clear, backlit, alphanumeric display. Intuitive push button menu system with user selectable operation in English, French,
German, Italian, Spanish and Dutch. Other languages available upon request.
Configuration and data download : Supplied configured, ready to use including data-logging as standard. Configurable via optional PC software and base station
for control of logging functions and data download
Construction : Impact resistant plastic, anti-static to EN50014
Dimensions : 49mm x 84mm x 136mm ( 1.9â x 3.3â x 5.3â )
Weight : Maximum 520g ( 18oz) including rechargeable battery and optional pump
IP rating : Instrument IP67 ( NEMA 4 & 6) .
Operating temperature# : -20° C to + 55° C ( -4° F to + 131° F) .
Storage temperature# : Instrument -40° C to + 80° C ( -40° F to + 176° F) .
Humidity range# : Continuous 20 to 90% RH. Intermittent 0-99% RH non-condensing.
Alarms : 3 levels of instantaneous alarm per channel. Time weighted average alarms on toxic channels.
Supplied pre-set ( user configurable via optional PC software and base station) .
Audible alarm : Periodic confidence bleep with differing dual tone for fault, gas alarm and warning rated 85dBA at 1m ( 90dBA at 1ft) .
Visual alarm : Green confidence flash with rapid red flashing for fault, gas alarm and warning indication.
Battery performance : Ni-MH rechargeable, operating life > 10 hours ( Charging time 7 hours) .
Dry cell disposable > 17 hours. Nominal reduction of 10% when used with pump
Optional pump : Supplied as standard with Impact Pro. Typical flow rate 0.3l/ min.
Automatic start/ stop feature with auto-test on start-up and flow fail alarm
Approvals : Europe: Ex II 2G, EEx ia d IIC T4 ( ATEX) .
USA: Class 1, Div 1, Groups A, B, C, D ( UL) .
Canada: Class 1, Div 1, Groups A, B, C, D ( CSA) .
Australia ( surface) : Ex ia s Zone 0, I/ IIB, T4.
Australia ( mines) : MDA GD 5053.
DMT: DMT 02 ATEX G 001 PFG Nr. 41300502.
Brazil: BR-Ex ia d IIC T4 ( INMETRO) .
Marine: Marine Equipment Directive MED 96/ 98/ EC
Standard supply : Each instrument is supplied complete with quick start guide, multi-lingual operating instructions on CD, dry cell battery holders
and batteries, belt clip and flow adaptor. Fully configured and ready to accept either disposable or serviceable sensor cartridges
the key considerations in selecting either the Impact or Impact Pro are highlighted below
Cartridge type# : Disposable or Serviceable
Integral pump/ pump adaptor : Disposable or Serviceable
Vibrating alarm : Yes
Vibrating alarm : Yes
Safelink : Yes
Optional accessories : A wide range of optional accessories are available including:
Base station and Impact Configuration Utility ( required for data download and configuration) .
Rechargeable NiMH batteries for use with base station or offline charger.
Enforcer calibration system.
Safelink communication system.
Pre-entry sample probes including hand aspirator, 1m probe, tubing and ball float.
Body harness and harness clip offering alternate mounting arrangements.
Field case for housing of all accessories as required.