Keterangan :

Design and features
8 mm cold-formed plate casing with volute.
Flanges: PN16 according to DIN2633.
Double-curvature impeller with blades on the rear side.
Axial adjustment of the impeller.
Single mechanical seal according to EN12756 L1K.
Fully-drainable pump.
IEC B3 ( B35 close-coupled models) motors, IP55,   F-class insulation.
Drain port: G ½ " ( BSP) .

Materials
Parts in contact with pumped media : AISI 316L
Lantern and bearing support : GG-22
Gaskets ( standard)   : EPDM according to FDA
Mechanical seal ( standard)     :   SiC/ C/ EPDM
Intenal surface finish of the casing and impeller : Blasted
External surface finish  : Blasted